*** Top Avionics RealCRT Shareware Gauges *** © 1998-1999 by Tony D'AMBROSIO This product is a SHAREWARE (17 US$). ************************************************************************** REGISTRATION ------------ The software you've downloaded is complete and fully working, but RealCRT gauges simulate a failure after 10 min of work. To suppress this limitation you must register to get a key code. Notice : only 1 registration is necessary per user, to get the right to use the complete panel and/or gauges on an unlimited number of panels. *** WARNING !!! *** Because of the particular display interface of Vectorial Design, the author cannot guaranty that this software will support all configuration, especially 3D cards. However, thanks to users feedback, most of the common configurations are now supported. Before registering, use the trial period to determine if this software supports your configuration with no problem (try many video modes in 2D and 3D). After registration, no money will be refund. However, in any case, if you encounter problems try to contact the author. He will do his best to resolve them... In order to help him, please: - Indicate your configuration (processor, memory, video cards, etc.) - Mention all message boxes, if any, displayed when the problem occurs - Look in your Gauges folder for any file with a ".err" extension - Join all .err files or contents to your E-mail How to register ? ----------------- You can register in two ways : - With VISA/MC, on the web. - With cash, by Postal Mail. The cost of the registration with VISA/MC is 17 US$ (includes a fee of 5 US$). The cost of the registration with cash is 12 US$ (less expensive because there is no fee, but you must pay the stamp, envelope, etc, and the delay to get your key code is longer) Whatever the registration mode you choose, you must give your Serial Number (see bellow how to get it). After registering, you will have immediately your key code by e-mail, to suppress limitations. If you have any problem with your key code, please contact directly the author at : WARNING ! the following email address is valid at this date - Jan. 1999 - but may change in the coming months. The updated address will be available in the latest version of Navigation Data 99. top.avionics@wanadoo.fr Registration on the web ----------------------- This program can be registered through RegNet - The Registration Network. RegNet #2524 RegNet can be reached on the World Wide Web at the following URL: http://www.reg.net or by calling 1 800 WWW2REG (1 800 999-2734) or (805) 288-1827. You can go directly to "TOP AVIONICS 747-400 Panel" registration page at : http://www.reg.net/product.asp?ID=2524 Registration by postal mail --------------------------- To register by postal mail, please, print the form bellow : =X================================================================ ---------------------------------- ***** | RealCRT gauges Register form | * * ---------------------------------- * * * * ** To register, fill out this *** ************* form and send it exclusively * ** * * ** by postal mail at : * * * * * * * * Tony D'AMBROSIO * * ****** 10, rue de Strasbourg * * 29480 LE RELECQ KERHUON ** - FRANCE - * ------------------------------------------------------------------ RealCRT gauges Registration : 12 US$ ------------------------------------------------------------------ First Name : Last Name : Address : Country : Phone ( ) Fax ( ) Email : (Key code will be sent ONLY by email) RealCRT Serial Number : _ _ _ _ - _ _ _ _ - _ _ _ _ _ _ (This number is ABSOLUTLY NEEDED - see below) PLEASE, CONFIRM YOUR REGISTRATION BY E-MAIL, ALSO INCLUDING THE SERIAL NUMBER !!! ----------------------------------------------------------------- Payment mode : -------------- Only cash in US$ or rounded equ. in FF, DM. Please, no other currency if possible. MONEY ORDER NOT ACCEPTED !!! (Note : you can register with VISA/MC at RegNet) ----------------------------------------------------------------- HOW TO GET YOUR SERIAL NUMBER ----------------------------- Install first Navigation Data 99. From the Start menu, select Program / Navigation Data 99 / VD Registration. Your Serial Number is displayed : communicate it when registering. After registration : - start again VD Registration - type your names and key code in the appropriate edit boxes - then click the Register button. - you can see a confirmation message In case of error, check : - letter cases ("a" or "A") - "O" (letter) instead of "0" (zero), or the opposite, or other equivalent mistake. Notice : The key format is "nnnnlll" with nnnn = digits and lll = letters. In case of problem, contact directly the author. If the registration is OK, your Serial Number is displayed - instead of "UNREGISTERED" - on the initialization screen, when you load a RealCRT gauge. *** IMPORTANT *** In order to keep your registration in case of a hard drive problem, please, press the Backup button after registering. You will need a formated diskette. When the backup is OK, keep the diskette in a safe place. In case of a new installation, run VDRegister again, then press the Restore button. You will need the backup diskette. When the restore is OK, quit immediately WITHOUT pressing the Register button !!! The backup diskette is *** STRICTLY PERSONAL *** This is *** absolutely forbidden *** to distribute its files.